ELECHOUSE · PN7160 MINI V1

Documentation and downloads

PN7160 MINI V1 -- I2C

Compact 13.56 MHz NFC module with a six-pin host connection and two included external antennas.

Start building

Add NFC to a 3.3 V host using I2C, an interrupt signal and an enable/reset signal. Start with the Quick Start guide, then use the integration guides when designing your own hardware and application.

Quick StartView product
3.3-5.5 VModule supply input; 3.3 V host logic
0x28Default 7-bit I2C address
50 × 40 mmIncluded antenna with 10 cm lead
25 × 10 mmIncluded antenna with 10 cm lead
PN7160 Mini V1 module and both included antennas
One module and two external antennas are included. A six-pin host cable is not included. Connect only one antenna at a time.

Read online

Product datasheet

Electrical specifications, pinout, antenna performance, dimensions and package contents.

Quick Start

ESP32-S3 wiring and the standard ELECHOUSE Arduino library's first card-detection example.

Software guide

Library installation, power settings, initialization and application flow.

Downloads

FileContents
Datasheet (PDF)Standalone product specifications and reading-performance reference.
User manual (PDF)Quick Start, hardware integration, software guide, API summary and troubleshooting in one document.
3D model (STEP)Nominal module geometry for enclosure and PCB integration.
Board outline (DXF)Nominal board outline and mounting geometry.
ELECHOUSE Arduino library (GitHub)The same shared library used by the standard ELECHOUSE PN7160 module. Apply the Mini wiring and power configuration in this Quick Start.
Detailed library APIThe library-maintained Markdown reference, readable online on GitHub.

Support and antenna options

A 100 × 160 mm antenna is available separately; see the reading-performance reference. Other antenna sizes and custom requirements can be discussed with service@elechouse.com.

For a separately manufactured PN7161 version, contact ELECHOUSE by email. It is not included in this product listing.